Roku BrightSign Betriebsanweisung PDF herunterladen (Seite 44)

Linux Shell (HD2000 only)

The HD2000 has a Linux shell that can be accessed via the serial port.

To access the Linux shell, enter the following at the Roku prompt:

exit

When done using the Linux shell, enter the following at the Linux prompt:

reboot

Writing Boot Script & Logo to Rom

With BrightSign HD600 Software version 1.1, you can now change the startup logo or

add a boot script on the HD600. Both are stored in the internal FLASH. Both the logo

and boot script have a size limit of 200KB.

Using Your Own Boot Logo

1. Save your logo in the following way: BMP, 8 bit indexed, RLE encoded

2. Copy your logo to a CF card

3. Connect your HD600 to a PC using a null modem cable

4. Run a terminal emulation program such as Hyperterm

5. Insert the CF card and apply power

6. When a prompt is presented in the terminal program, type the following:

writebootfile logo.bmp boot.bmp

7. Assumes logo.bmp is the file name of your logo file on the CF card.

8. Reboot the system - your logo should appear

Using Your Own Boot Script

The script must be self contained. For example, it can't be used to play a playlist or csv

file. You can use the boot script to play any content on your CF card (images, audio, and

videos).

1. Save your boot script as myscript.bas

2. Copy your myscript.bas to a CF card

3. Connect your HD600 to a PC using a null modem cable

4. Run a terminal emulation program such as Hyperterm

5. Insert the CF card and apply power.

6. When a prompt is presented in the terminal program, type the following:

writebootfile myscript.bas autorun.bas

7. Assumes myscript.bas is the file name of your boot script.

1 2 ... 39 40 41 42 43 44 45 46 47 48

Keine Kommentare

Roku BrightSign Betriebsanweisung Seite 44